Drill/Mill Center; 28" x 16" x 15.5" (711 x 406 x 394 mm), 40 taper, 15 hp (11.2 kW) vector drive, 15,000 rpm, 2400 ipm (61 m/min) rapids, high-speed 18+1 side-mount tool changer, power-failure detection module, 1 GB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 45-gallon (170 L) flood-coolant system. Anchor kit highly recommended for installation DM-2 Specifications
| DM-2 - $64,995.00 | ||
| TRAVELS | S.A.E. | METRIC |
|---|---|---|
| X Axis | 28 " | 711 mm |
| Y Axis | 16 " | 406 mm |
| Z Axis | 15.5 " | 394 mm |
| TABLE | S.A.E. | METRIC |
| Length | 34 " | 864 mm |
| Width | 15 " | 381 mm |
| T-Slot Width | 5/8 " | 16 mm |
| T-Slot Center Distance | 4.92 " | 125.0 mm |
| Number of Std T-Slots | 3 | 3 |
| Max Weight on Table (evenly distributed) | 250 lb | 113 kg |
| SPINDLE | S.A.E. | METRIC |
| Max Rating | 15 hp | 11.2 kW |
| Max Speed | 15,000 rpm | 15000 rpm |
| Max Torque | 46 ft-lb @ 1700 rpm | 62 Nm @ 1700 rpm |
| Drive System | Inline Direct Drive | Inline Direct Drive |
| Taper | CT40 or BT40 | CT40 or BT40 |
| Bearing Lubrication | Air/Oil | Air/Oil |
| Cooling | Air | Air |
| TAPPING | S.A.E. | METRIC |
| Max Tapping Speed | 5000 rpm | 5000 rpm |
| Max Tap Size (aluminum) | 1/2 x 13 | M12 x 1.75 mm |
| FEEDRATES | S.A.E. | METRIC |
| Rapids on X | 2400 in/min | 61.0 m/min |
| Rapids on Y | 2400 in/min | 61.0 m/min |
| Rapids on Z | 2400 in/min | 61.0 m/min |
| Max Cutting | 1200 in/min | 30.5 m/min |
| AXIS MOTORS | S.A.E. | METRIC |
| Max Thrust X | 2550 lb | 11343 N |
| Max Thrust Y | 2550 lb | 11343 N |
| Max Thrust Z | 4200 lb | 18683 N |
| TOOL CHANGER | S.A.E. | METRIC |
| Type | SMTC | SMTC |
| Capacity | 18+1 | 18+1 |
| Max Tool Diameter | 2.5 " | 64 mm |
| Max Tool Diameter (adjacent empty) | 2.5 " | 64 mm |
| Max Tool Length | 7.0 " | 178 mm |
| GENERAL | S.A.E. | METRIC |
| Air Required | 4 scfm, 100 psi | 113 L/min, 6.9 bar |
| Coolant Capacity | 45 gal | 170 L |
